Connect to Your Cable-Ready Stereo TV, Stereo VCR and DVD or Game Console

1. Connect the Cable Input to the CABLE IN connection on the back of the Explorer 2000 terminal.Connect the cable between the CABLE OUT on the Explorer 2000 and the CABLE/ANTENNA connector on the VCR.
2. Connect the cable between the CABLE OUT on the VCR and the CABLE/ANTENNA connector on the TV.
3. Connect a cable from the VIDEO OUT connection on the VCR to the VIDEO IN connection on the TV.
4. Connect an audio input cable from the AUDIO OUT connections on the VCR to the AUDIO IN connections on the TV.
5. Connect an audio input cable from the AUDIO OUT connections on the DVD or GAME SYSTEM to the AUDIO IN connections on the VCR.
6. Connect an audio input cable from the VIDEO OUT connections on the DVD or GAME SYSTEM to the VIDEO IN connections on the VCR.

NOTE: The sound from the Explorer 2000 terminal will be in mono only, not stereo. If your VCR has two sets of RCA inputs (red, yellow, and white wires) you can plug the Game System directly into the VCR after hooking it up using this diagram.

<< Return to Main Installation Guides Page