title here
|
Motorola SBG1000 Wireless Cable Modem Gateway |
|
Motorola SBG1000 - Front Panel |
 |
| Front Panel Troubleshooting Diagram |
Please note: This modem Includes a built in Router, Firewall, print server and VPN service.
Syracuse High Speed Internet only supports the Cable Modem feature of this product.
|
Motorola SBG1000 Wireless Cable Modem Gateway - Front Panel | |||
| Item | Light | Flashing | On |
|
1 |
RX (Receive) |
Scanning for a receive (downstream) channel connection | The downstream channel is connected |
|
2 |
TX (Transmit) |
Scanning for a send (upstream) channel | The upstream channel is connected |
|
3 |
LNK (Link) |
Scanning for a network connection | The startup process is complete and the SBG1000 in online |
|
4 |
 |
Transmitting or receiving data | There is no solid on state |
|
5 |
 |
Data transfer to printer | Printer is connected |
|
6 |
 |
Wireless activity | Wireless feature is functioning normally |
|
7 |
 |
USB activity | There is a proper USB connection |
|
8 |
Activity |
Ethernet activity on the port | Â |
|
9 |
10 100 |
No flashing mode |
Indicates the LAN connection speed:
|
|
10 |
Half Full |
No flashing mode |
Indicates the LAN port duplex mode:
|
|
11 |
Link 1 to 5 |
No flashing mode | There is a proper Ethernet connection to the port |
|
12 |
 |
Data transfer over phone line using HPNA | There is no solid on state |
|
13 |
 |
No flashing mode | The SBG1000 power supply is working properly |
| Rear Panel |
| Motorola SBG1000 - Rear Panel |
 |
|
Motorola SBG1000 Wireless Cable Modem Gateway - Rear Panel | |
| 1 | The printer port provides a connection for one printer. |
| 2 | The Motorola SBG1000 Wireless Cable Modem Gateway includes two antennas. The optional Motorola External Diversity Antenna provides higher gain to increase wireless LAN performance and coverage. |
| 3 | Use the HPNA ports to connect an HPNA LAN:§ Connect the bottom HPNA port to the telephone jack using the supplied telephone wire terminated with RJ-11 connectors.§ You can connect a telephone to the top HPNA port. |
| 4 | Use Ethernet ports 1 to 5 to connect an Ethernet LAN cable with RJ-45 connectors. You can connect Ethernet equipped computers, hubs, bridges or switches. |
| 5 | Use the USB port for connecting a PC to the USB port. |
| 6 | If you experience a problem, you can push this recessed button to restart the SBG1000. To rest all values to their defaults, hold down the button for more than five seconds. Resetting may take 5 to 30 minutes because the SBG1000 must find and lock on the appropriate communications channels. |
