Remotes

Scientific-Atlanta AT2300 Digital Remote (Green LED)

Remote Diagram
Set Up For Explorer Home Terminal
Set Up TV
Set Up VCR
Volume Control Option
Helpful Hints
Getting Your Code
Searching The Code Library
Device Set-up Codes
TV Set-up Codes
VCR Set-up Codes

 

 

 

 

Set Up For Scientific-Atlanta Explorer Home Terminal - Back to Top

No setup is required. The AT2300 is ready to run the Explorer Home Terminal.

If for some reason, the Explorer terminal does not respond to the AT2300, first try re-entering the set-up code.

• Turn on the Explorer terminal.
• Point the AT2300 away from the terminal.
• Press and hold CBL and SELECT at the same time, until the indicator light blinks twice.
• Enter 8 9 1. Indicator light blinks twice.
• Point the AT2300 toward the terminal.
• Press CBL. The terminal should turn off.

Set Up TV - Back to Top

Find the TV brand and three-digit codes in the TV Set-Up Codes table. The most popular code for each brand is listed first. If your brand is not listed, try Searching The Code Library.

1. Turn on TV.
2. Point the AT2300 away from the TV.
3. Press and hold TV and SELECT at the same time until the light blinks twice.
4. Enter the four-digit code. Indicator light blinks twice.
5. Point the AT2300 toward the TV.
6. Press TV. Did the TV turn off?

Yes: Setup complete. Write down the four-digit setup code for future reference.

No: Try setup again starting from step 2, using the next code listed for your brand. If you've tried all codes for your brand without success, use the method under Searching The Code Library.

Set Up VCR - Back to Top

Find the VCR brand and three-digit codes in the VCR Set-Up Codes table. The most popular code for each brand is listed first. If your brand is not listed, use the method under Searching The Code Library.

1. Turn your VCR on. If your VCR does not have a POWER key, load a tape into the VCR and follow step 7 instead of step 6.
2. Point the AT2300 away from the VCR.
3. Press and hold VCR and SELECT at the same time until the light blinks twice.
4. Enter the three-digit code. Indicator light blinks twice.
5. Point the AT2300 toward the VCR.
6. Press VCR. Did the VCR turn off?
7. If your VCR does not have a POWER key: Move the VCR/VOD toggle switch to the VCR position, and press (PLAY).

Did the VCR start to play?

Yes: Setup complete. Write down the three-digit setup code below for future reference.

No: Try setup again starting from step 2, using the next code listed for your brand. If you've tried all codes for your brand without success, try the method under Searching The Code Library.

Volume Control Option - Back to Top

You can set up the AT2300 to control volume and mute functions through the Explorer Home Terminal, or through your TV (factory default).

To switch volume/mute control from the TV to the Explorer Home Terminal:

1. Point the remote control away from the Explorer Home Terminal, TV, and VCR.
2. Press and hold CBL and SELECT at the same time until the light blinks twice.
3. Press 9 9 3, then CBL. The light blinks twice.
4. To make sure programming was done correctly, aim the remote at the Explorer and press VOL +, VOL -, or MUTE. The volume setting on the Explorer should change.

To switch volume/mute control back to the TV:

1. Point the remote control away from the Explorer Home Terminal, TV, and VCR.
2. Press and hold CBL and SELECT at the same time until the light blinks twice.
3. Press 9 9 3, then press TV. The light blinks twice.
4. To make sure programming was done correctly, aim the remote at the TV and press VOL +, VOL -, or MUTE. The volume setting on the TV should change.

Helpful Hints - Back to Top

Setup: If the AT2300 does not operate the TV or VCR properly, or if it operates some but not all of the remote control commands,

1. Try all the codes listed for the device.
2. Try the search method.

Many devices use similar remote control codes. While searching the library, you may lock onto a similar code for which only some commands work. Start the Searching The Code Library method over. Repeat the process until you find the correct code.

Operation: If the red indicator light does not blink when you press a key, or if the operation is intermittent, replace both batteries with two new AA alkaline batteries. Replace both batteries at the same time.

Searching The Code Library - Back to Top

If none of the listed TV or VCR codes work, you can enter a code that searches the library of codes. The remote control automatically selects the proper code for your TV or VCR. Make sure your TV or VCR is on before you program the remote control.

To search the library of TV codes,

1. Turn on the TV.
2. Point the remote control away from your TV.
3. Press and hold TV and SELECT at the same time until the LED on the remote control blinks twice.
4. Press 9 9 1. The light blinks twice.
5. Point the remote control at your TV and press TV. Did the TV turn off?

Yes: Immediately press SELECT. The light blinks twice. Setup is complete. To make sure programming was done correctly, aim the remote at the TV and press TV. The TV should turn back on. Note: Now, be sure to follow Getting Your Codes, to find out the three-digit setup code. Write it down so you can use the direct setup method in the future.

No: Repeat step 5 until TV turns off.

To search the library of VCR codes, follow the procedure above, but substitute "VCR" for "TV" in each step.

Getting Your Code - Back to Top

If you've used the Searching the Code Library method to program your AT2300, or if you've misplaced your setup code, you can find out the loaded TV and VCR codes.

To get the TV code:

1. Point the remote control away from the Explorer Home Terminal, TV, and VCR.
2. Press and hold TV and SELECT at the same time until the light blinks twice.
3. Press 9 9 0. The light blinks twice.
4. Press 1, wait 1 second, then count the number of blinks. This is the first number in the code. For example, 4 blinks means the first number in the code is 4.
5. Press 2, pause, and count the number of blinks. This is the second number.
6. Press 3, pause, and count the number of blinks. This is the third number.
7. Write down the code for future reference.

To get the VCR code, follow the steps above, but substitute "VCR" for "TV" in step 1. Write down the code for future reference.

Device Set-up Codes - Back to Top
TV Set-up Codes
VCR Set-up Codes

TV Set-up Codes - Back to Top
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Admiral 0107
Adventura 0060
Aiko 0106
Akai 0044
Alaron 0193
Ambassador 0191
Anam 0194
Anam National0 069
AOC 0033, 0044, 0199
Audiovox 0194, 0106, 0465
Baysonic 0194
Belcor 0033
Bell & Howell 0030, 0168
Bradford 0194
Candle 0044, 0060, 0070
Carnivale 0044
Carver 0068
Celebrity 0014
Cineral 0106, 0465
Citizen 0044, 0060, 0070, 0074, 0106
Concerto 0070
Contec 0194
Craig 0194
Crosley 0068
Crown 0194
Curtis Mathes 0180, 0030, 0044, 0061, 0065, 0068, 0070, 0074, 0107, 0259, 0268, 0465
CXC 0194
Daewoo 0106, 0465
Denon 0159
Dumont 0031
Electrobrand 0014
Emerson 0168, 0191, 0192, 0193, 0194, 0199, 0250, 0294, 0296, 0477
Envision 0044
Fisher 0168
Fujitsu 0193
Funai 0185, 0193, 0194
Futuretech 0194
GE 0035, 0061, 0065, 0069, 0149, 0192, 0296, 0465
Gibraltor 0031, 0033, 0044
GoldStar 0044, 0070, 0192
Gradiente 0067, 0070
Grunpy 0093, 0194
Hallmark 0192
Harley Davidson 0193
Harvard 0194
Hitachi 0070, 0159
Infinity 0068
Inteq 0068
Janeil 0060
JBL 0068
JCB 0014
JVC 0067
KEC 0194
Kenwood 0044
Kloss 0060
KTV 0044, 0194
Logik 0030
Luxman 0070
LG 0070
LXI 0061, 0068, 0168, 0170, 0192
Magnavox 0044, 0068, 0193
Majestic 0030
Marantz 0044, 0068
Matsushita 0264
Megatron 0159, 0192
MEI 0199
Memorex 0030, 0070, 0164, 0168, 0192, 0264
MGA 0044, 0164, 0192
Midland 0031, 0061, 0065, 0149
Minutz 0035
Mitsubishi 0107, 0164, 0192
Motorola 0107
MTC 0044, 0070, 0074
Multitech 0194
NAD 0170, 0180, 0192
NEC 0044, 0070
Nikko 0044, 0106, 0192
NTC 0106
Onwa 0194
Optimus 0180, 0168, 0264
Optonica 0107, 0179
Orion 0250, 0193, 0477
Panasonic 0065, 0264
Penney 0035, 0044, 0061, 0065, 0074, 0149, 0170, 0192
Philco 0044, 0068, 0159, 0477
Philips 0068
Pilot 0044
Pioneer 0180
Portland 0106
Prism 0065
Proscan 0061
Proton 0192
Pulsar 0031
Quasar 0065, 0179, 0264
Radio Shack 0044, 0061, 0070, 0168, 0179, 0192, 0194
RCA 0065, 0061, 0104, 0107, 0149
Realistic 0044, 0070, 0168, 0179, 0192, 0194
Runco 0031, 0044
Sampo 0044
Samsung 0044, 0070, 0074, 0192
Sansei 0465
Sansui 0477
Sanyo 0168
Scotch 0192
Scott 0192, 0193, 0194, 0250
Sears 0061, 0068, 0070, 0168, 0170, 0173, 0185, 0192, 0193
Semivox 0194
Semp 0170
Sharp 0107, 0179
Signature 0030
Sony 0014
Soundesign 0192, 0193, 0194
Squareview 0185
SSS 0194
Starlite 0194
Supre-Macy 0060
Supreme 0014
Sylvania 0044, 0068
Symphonic 0185
Tandy 0107
Technics 0065, 0264
Technol Ace 0193
Techwood 0065, 0070
Teknika 0030, 0068, 0070, 0074, 0106, 0164, 0193, 0194
Telefunken 0070
TMK 0070, 0191, 0192
Toshiba 0074, 0168, 0170
Vector Research 0044
Victor 0067
Vidikron 0068
Vidtech 0192
Viking 0060
Wards 0030, 0035, 0044, 0068, 0070, 0179, 0192, 0193
Yamaha 0033, 0044
Zenith 0030, 0031, 0106

VCR Set-up Codes - Back to Set-up Codes
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Admiral 0062
Adventura 0014
Aiko 0292
Aiwa 0014
Akai 0055, 0075, 0120
American High 0049
Asha 0254
Audiovox 0051
Beaumark 0254
Bell & Howell 0118
Broksonic 0016, 0135, 0198, 0225
Calix 0051
Canon 0049
Capehart 0034
Carver 0095
CCE 0086
Citizen 0051, 0292
Colt 0086
Craig 0051, 0061, 0086, 0254
Curtis Mathes 0049, 0055, 0074, 0176
Cybernex 0254
Daewoo 0059, 0292
Denon 0056
Dynatech 0014
Electrohome 0051
Electrophonic 0051
Emerex 0046
Emerson 0014, 0016, 0051, 0057, 0075, 0135, 0198, 0222, 0225, 0226, 0292, 0493
Fisher 0061, 0068, 0118
Fuji 0047, 0049
Funai 0014
Garrard 0014
GE 0062, 0049, 0074, 0216
Goldstar 0051, 0052
Gradiente 0014
Harley Davidson 0014
Harmon Kardon 0052
Harwood 0086
Headquarter 0060
Hi-Q 0061
Hitachi 0014, 0055, 0056, 0119
Jensen 0055
JVC 0055, 0081
KEC 0051, 0292
Kenwood 0052, 0055, 0081
KLH 0086
Kodak 0049, 0051
Lloyd 0014, 0222
Lloyd's 0222
Logik 0086
LXI 0051
Magnasonic 0292
Magnavox 0049, 0051, 0095, 0163
Magnin 0254
Marantz 0049, 0095
Marta 0051
Matsushita 0049, 0176
MEI 0049
Memorex 0014, 0049, 0051, 0053, 0060, 0061, 0062, 0118, 0254
MGA 0057, 0075
MGN Technology 0254
Minolta 0056, 0119
Mitsubishi 0057, 0075, 0062, 0081
MTC 0014, 0254
Multitech 0014, 0086
NEC 0081, 0118
Nikko 0051
Noblex 0254
Olympus 0049
Optimus 0062, 0051, 0118, 0176
Orion 0016, 0198
Panasonic 0049, 0176
Penney 0049, 0051, 0052, 0056, 0068, 0254
Pentax 0056, 0119
Philco 0049
Philips 0049, 0095
Pilot 0051
Pioneer 0081, 0176
Profitronic 0254
Protec 0086
Pulsar 0053
Quarter 0060
Quartz 0060
Quasar 0149, 0176
Radio Shack 0014, 0051
Randex 0051
RCA 0062, 0049, 0056, 0074, 0119, 0120, 0163, 0216
Realistic 0014, 0049, 0060, 0061, 0062, 0118
Runco 0053
Samsung 0059, 0254
Sanky 0053, 0062
Sansui 0055, 0081, 0014
Sanyo 0060, 0061, 0118, 0254
Scott 0057, 0059, 0135, 0198, 0225, 0226
Sears 0049, 0051, 0056, 0060, 0061, 0068, 0118, 0119
Sharp 0062, 0076
Shintom 0086
Shogun 0254
Singer 0086
Sony 0046, 0047, 0048, 0049
STS 0056
Sylvania 0014, 0049, 0057, 0095
Symphonic 0014
Tatung 0055
Teac 0041, 0055
Technics 0049, 0176
Teknika 0014, 0049,0 051
TMK 0222, 0254
Toshiba 0057, 0059, 0226
Totevision 0051, 0254
Unitech 0254
Vector 0059
Vector Research 0052
Video Concepts 0059, 0075
Videosonic 0254
Wards 0014, 0049, 0056, 0061, 0062, 0074, 0076, 0086, 0095, 0163, 0226, 0254
XR-1000 0014, 0049, 0086
Yamaha 0052
Zenith 0047, 0048, 0053