Remotes

Pioneer BR 350/Scientific-Atlanta E2050 Digital Remote (Red LED)

 

Remote Diagram
Set Up For Voyager Home Terminal
Set Up TV
Set Up VCR
Volume Control Option
Helpful Hints
Getting Your Code
Searching The Code Library
Device Set-up Codes
TV Set-up Codes
VCR Set-up Codes

 

 

 

 

Set Up For Voyager Home Terminal - Back to Top

No setup is required. The BR-350 is ready to run the Voyager Home Terminal.

If for some reason, the Voyager terminal does not respond to the BR-350, first try re-entering the set-up code.

• Turn on the Voyager terminal.
• Point the BR-350 away from the terminal.
• Press and hold CBL and SELECT at the same time, until the indicator light blinks twice.
• Enter 8 9 1. Indicator light blinks twice.
• Point the BR-350 toward the terminal.
• Press CBL. The terminal should turn off.

Set Up TV - Back to Top

Find the TV brand and three-digit codes in the TV Set-Up Codes table. The most popular code for each brand is listed first. If your brand is not listed, try Searching The Code Library.

1. Turn on TV.
2. Point the BR-350 away from the TV.
3. Press and hold TV and SELECT at the same time until the light blinks twice.
4. Enter the three-digit code. Indicator light blinks twice.
5. Point the BR-350 toward the TV.
6. Press TV. Did the TV turn off?

Yes: Setup complete. Write down the three-digit setup code for future reference.

No: Try setup again starting from step 2, using the next code listed for your brand. If you've tried all codes for your brand without success, use the method under Searching The Code Library.

Set Up VCR - Back to Top

Find the VCR brand and three-digit codes in the VCR Set-Up Codes table. The most popular code for each brand is listed first. If your brand is not listed, use the method under Searching The Code Library.

1. Turn your VCR on. If your VCR does not have a POWER key, load a tape into the VCR and follow step 7 instead of step 6.
2. Point the BR-350 away from the VCR.
3. Press and hold VCR and SELECT at the same time until the light blinks twice.
4. Enter the three-digit code. Indicator light blinks twice.
5. Point the BR-350 toward the VCR.
6. Press VCR. Did the VCR turn off?
7. If your VCR does not have a POWER key: Move the VCR/VOD toggle switch to the VCR position, and press (PLAY).

Did the VCR start to play?

Yes: Setup complete. Write down the three-digit setup code below for future reference.

No: Try setup again starting from step 2, using the next code listed for your brand. If you've tried all codes for your brand without success, try the method under Searching The Code Library.

Volume Control Option - Back to Top

You can set up the BR-350 to control volume and mute functions through the Voyager Home Terminal, or through your TV (factory default).

To switch volume/mute control from the TV to the Voyager Home Terminal:

1. Point the remote control away from the Voyager Home Terminal, TV, and VCR.
2. Press and hold CBL and SELECT at the same time until the light blinks twice.
3. Press 9 9 3, then CBL. The light blinks twice.
4. To make sure programming was done correctly, aim the remote at the Voyager and press VOL +, VOL -, or MUTE. The volume setting on the Voyager should change.

To switch volume/mute control back to the TV:

1. Point the remote control away from the Voyager Home Terminal, TV, and VCR.
2. Press and hold CBL and SELECT at the same time until the light blinks twice.
3. Press 9 9 3, then press TV. The light blinks twice.
4. To make sure programming was done correctly, aim the remote at the TV and press VOL +, VOL -, or MUTE. The volume setting on the TV should change.

Helpful Hints - Back to Top

Setup: If the BR-350 does not operate the TV or VCR properly, or if it operates some but not all of the remote control commands,

1. Try all the codes listed for the device.
2. Try the search method.

Many devices use similar remote control codes. While searching the library, you may lock onto a similar code for which only some commands work. Start the Searching The Code Library method over. Repeat the process until you find the correct code.

Operation: If the red indicator light does not blink when you press a key, or if the operation is intermittent, replace both batteries with two new AA alkaline batteries. Replace both batteries at the same time.

Searching The Code Library - Back to Top

If none of the listed TV or VCR codes work, you can enter a code that searches the library of codes. The remote control automatically selects the proper code for your TV or VCR. Make sure your TV or VCR is on before you program the remote control.

To search the library of TV codes,

1. Turn on the TV.
2. Point the remote control away from your TV.
3. Press and hold TV and SELECT at the same time until the LED on the remote control blinks twice.
4. Press 9 9 1. The light blinks twice.
5. Point the remote control at your TV and press TV. Did the TV turn off?

Yes: Immediately press SELECT. The light blinks twice. Setup is complete. To make sure programming was done correctly, aim the remote at the TV and press TV. The TV should turn back on. Note: Now, be sure to follow Getting Your Codes, to find out the three-digit setup code. Write it down so you can use the direct setup method in the future.

No: Repeat step 5 until TV turns off.

To search the library of VCR codes, follow the procedure above, but substitute "VCR" for "TV" in each step.

Getting Your Code - Back to Top

If you've used the Searching the Code Library method to program your BR-350, or if you've misplaced your setup code, you can find out the loaded TV and VCR codes.

To get the TV code:

1. Point the remote control away from the Voyager Home Terminal, TV, and VCR.
2. Press and hold TV and SELECT at the same time until the light blinks twice.
3. Press 9 9 0. The light blinks twice.
4. Press 1, wait 1 second, then count the number of blinks. This is the first number in the code. For example, 4 blinks means the first number in the code is 4.
5. Press 2, pause, and count the number of blinks. This is the second number.
6. Press 3, pause, and count the number of blinks. This is the third number.
7. Write down the code for future reference.

To get the VCR code, follow the steps above, but substitute "VCR" for "TV" in step 1. Write down the code for future reference.

Device Set-up Codes - Back to Top
TV Set-up Codes
VCR Set-up Codes

TV Set-up Codes - Back to Top
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Admiral 107
Adventura 060
Aiko 106
Akai 044
Alaron 193
Ambassador 191
Anam 194
Anam National 069
AOC 033, 044, 199
Audiovox 194, 106, 465
Baysonic 194
Belcor 033
Bell & Howell 030, 168
Bradford 194
Candle 044, 060, 070
Carnivale 044
Carver 068
Celebrity 014
Cineral 106, 465
Citizen 044, 060, 070, 074, 106
Concerto 070
Contec 194
Craig 194
Crosley
Crown 068
Curtis Mathes 180, 030, 044, 061, 065, 068, 070, 074, 107, 259, 268, 465
CXC 194
Daewoo 106, 465
Denon 159
Dumont 031
Electrobrand 014
Emerson 168, 191, 192, 193, 194, 199, 250, 294, 296, 477
Envision 044
Fisher 168
Fujitsu 193
Funai 185, 193, 194
Futuretech 194
GE 035, 061, 065, 069, 149, 192, 296, 465
Gibraltor 031, 033, 044
GoldStar 044, 070, 192
Gradiente 067, 070
Grunpy 093, 194
Hallmark 192
Harley Davidson
Harvard 194
Hitachi 070, 159
Infinity
Inteq 068
Janeil 060
JBL 068
JCB 014
JVC 067
KEC 194
Kenwood 044
Kloss 060
KTV 044, 194
Logik 030
Luxman 070
LG 070
LXI 061, 068, 168, 170, 192
Magnavox 044, 068, 193
Majestic 030
Marantz 044, 068
Matsushita 264
Megatron 159, 192
MEI 199
Memorex 030, 070, 164,168, 192, 264
MGA 044, 164, 192
Midland 031, 061, 065, 149
Minutz 035
Mitsubishi 107, 164, 192
Motorola 107
MTC 044, 070, 074
Multitech 194
NAD 170, 180, 192
NEC 044, 070
Nikko 044, 106, 192
NTC 106
Onwa 194
Optimus 180, 168, 264
Optonica 107, 179
Orion 250, 193, 477
Panasonic 065, 264
Penney 035, 044, 061, 065, 074, 149, 170, 192
Philco 044, 068, 159, 477
Philips 068
Pilot 044
Pioneer 180
Portland 106
Prism 065
Proscan 061
Proton 192
Pulsar 031
Quasar 065, 179, 264
Radio Shack 044, 061, 070, 168, 179, 192, 194
RCA 065, 061, 104, 107, 149
Realistic 044, 070, 168, 179, 192, 194
Runco 031, 044
Sampo 044
Samsung 044, 070, 074, 192
Sansei 465
Sansui 477
Sanyo 168
Scotch 192
Scott 192, 193, 194, 250
Sears 061, 068, 070, 168, 170, 173, 185, 192, 193
Semivox 194
Semp 170
Sharp 107, 179
Signature 030
Sony 014
Soundesign 192, 193, 194
Squareview 185
SSS 194
Starlite 194
Supre-Macy 060
Supreme 014
Sylvania 044, 068
Symphonic 185
Tandy 107
Technics 065, 264
Technol Ace 193
Techwood 065, 070
Teknika 030, 068, 070, 074, 106, 164, 193, 194
Telefunken 070
TMK 070, 191, 192
Toshiba 074, 168, 170
Vector Research 044
Victor 067
Vidikron 068
Vidtech 192
Viking 060
Wards 030, 035, 044, 068, 070, 179, 192, 193
Yamaha 033, 044
Zenith 030, 031, 106

VCR Set-up Codes - Back to Set-up Codes
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Admiral 062
Adventura 014
Aiko 292
Aiwa 014
Akai 055, 075, 120
American High 049
Asha 254
Audiovox 051
Beaumark 254
Bell & Howell 118
Broksonic 016, 135, 198, 225
Calix 051
Canon 049
Capehart 034
Carver 095
CCE 086
Citizen 051, 292
Colt 086
Craig 051, 061, 086, 254
Curtis Mathes 049, 055, 074, 176
Cybernex 254
Daewoo 059, 292
Denon 056
Dynatech 014
Electrohome 051
Electrophonic 051
Emerex 046
Emerson 014, 016, 051, 057, 075, 135, 198, 222, 225, 226, 292, 493
Fisher 061, 068, 118
Fuji 047, 049
Funai 014
Garrard 014
GE 062, 049, 074, 216
Goldstar 051, 052
Gradiente 014
Harley Davidson 014
Harmon Kardon 052
Harwood 086
Headquarter 060
Hi-Q 061
Hitachi 014, 055, 056, 119
Jensen 055
JVC 055, 081
KEC 051, 292
Kenwood 052, 055, 081
KLH 086
Kodak 049, 051
Lloyd 014, 222
Lloyd's 222
Logik 086
LXI 051
Magnasonic 292
Magnavox 049, 051, 095, 163
Magnin 254
Marantz 049, 095
Marta 051
Matsushita 049, 176
MEI 049
Memorex 014, 049, 051, 053, 060, 061, 062, 118, 254
MGA 057, 075
MGN Technology 254
Minolta 056, 119
Mitsubishi 057, 075, 062, 081
MTC 014, 254
Multitech 014, 086
NEC 0052, 055, 081, 118
Nikko 051
Noblex 254
Olympus 049
Optimus 062, 051, 118, 176
Orion 016, 198
Panasonic 049, 176
Penney 049, 051, 052, 056, 068, 254
Pentax 056, 119
Philco 049
Philips 049, 095
Pilot 051
Pioneer 081, 176
Profitronic 254
Protec 086
Pulsar 053
Quarter 060
Quartz 060
Quasar 149, 176
Radio Shack 014, 051
Randex 051
RCA 062, 049, 056, 074, 119, 120, 163, 216
Realistic 014, 049, 060, 061, 062, 118
Runco 053
Samsung 059, 254
Sanky 053, 062
Sansui 055, 081, 014
Sanyo 060, 061, 118, 254
Scott 057, 059, 135, 198, 225, 226
Sears 049, 051, 056, 060, 061, 068, 118, 119
Sharp 062, 076
Shintom 086
Shogun 254
Singer 086
Sony 046, 047, 048, 049
STS 056
Sylvania 014, 049, 057, 095
Symphonic 014
Tatung 055
Teac 041, 055
Technics 049, 176
Teknika 014, 049, 051
TMK 222, 254
Toshiba 057, 059, 226
Totevision 051,254
Unitech 254
Vector 059
Vector Research 052
Video Concepts 059, 075
Videosonic 254
Wards 014, 049, 056, 061, 062, 074, 076, 086, 095, 163, 226, 254
XR-1000 014, 049, 086
Yamaha 052
Zenith 047, 048, 053