Using the DRC - 400/425 Remote

The DRC - 400/425 Remote has been designed to control most TV sets as well your Digital Home Terminal, VCR and auxiliary equipment like DVD players. To learn more about using your remote, choose any of the options below:

• The DRC - 400/425 Remote Control Keypad - View an explanation of the buttons on your remote.
• DRC - 400/425 Batteries - Information about changing the batteries on your digital remote control.
• Programming the DRC - 400/425 Remote Control - Information about programming your remote to operate your TV, VCR or DVD. Includes remote codes for most brands.
• DRC - 400/425 Basic Use - Turning on devices, changing channels, adjusting the volume and changing the volume control.

*Note: These procedures apply only to the Pioneer and the Scientific Atlanta remotes only. For other brands see their companion instruction booklets.

Turning on Devices

• To turn on the Digital Home Terminal
  Press . The Digital Home Terminal turns on.
• To Turn On the TV
  Press and tune your TV to channel 3.
• To turn on the VCR
  Press . The VCR turns on.

1. If you know the channel number, enter the number using the number buttons. Press for immediate tuning.
2. To go one channel up or down from the current channel, press on the Channel button.
3. To see the last viewed channel, press .
4. To see the next channel that you specified as a favorite channel, press .

Adjusting the Volume Level

1. To increase or decrease the volume, press on the Volume button.
2. To turn the volume off completely, press .
3. To restore the volume and continue listening to the program, press again.

Changing Volume Control
You can control the volume of a component through its associated mode (i.e. Through the cable in Cable mode, through the TV in TV mode., and through the Auxilary device in AUX. mode.)

1. Press and hold the mode key of the device that you want to control the volume until the four mode indicators flash twice. The light of the mode you want should be now be on.
2. Press and release Volume .
3. The device's mode light will blink three times, showing that volume control has been transferred to that device.

For more detailed information on volume control for your digital remote, please see Volume Control in the programming section.

*To receive all services, Digital Cable, remote and lease of a Digital set-top box are required. Some services are not available to Cable Card customers. All services and channels may not be available in all areas. Subject to change without notice. Some restrictions may apply.